Saturday, August 3, 2024

How to Sew a Bookshelf Quilt Block


These bookshelf quilt blocks are a LOT easier to sew than they look!


I promised my rising college freshman a quilt for her dorm room bed, something that’s always easier to promise than it is to do, ahem. Just between us, I’d hoped she’d pick the Cats in Space pattern, because I’ve been dying to sew it without a good reason to, but instead she got on Pinterest, discovered bookshelf quilts, and asked if I could make her one of those.

My first ideas were significantly overengineered, based mostly on the Fandom in Stitches bookcase quilt blocks. I even went as far as to check out a bunch of books from the library, determined to teach myself Foundation Paper Piecing to make the quilt happen. Fortunately, though, I also started noodling around with my fabric scraps, and I figured out that I could use fabric strips to make a pretty darn convincing shelf full of books.

It turned out that my college kid loved the look of a plain bookshelf quilt block with nothing but books on it, no paper pieced vases or potted plants or little tchotchkes needed. And it’s certainly going to make my life easier to use the same piecing method for every quilt block! I’m also loving how I can use up fabric scraps, including more unusual scraps like bits of favorite clothes and old blankies and curtains, etc., to make books that also have secret sentimental value.

Here’s a tutorial for the basic bookshelf quilt block that I’ve been making dozens of over the past few weeks. This bookshelf quilt block is 10.5″ unfinished (10″ finished), but you can scale it up or down as needed.

Materials Needed


  • neutral background fabric for the bookshelf. I’d recommend something like a Kona cotton solid for this fabric. My kid had suggested black or brown, but unfortunately not until I’d already started and gotten a couple of blocks under my belt, so for this quilt we’re going with the grey I originally chose.
  • fabrics for the books. Anything that you can sew and that would feel pleasant in a quilt should work for this. Jelly rolls are really nice to work with, since they’re already cut to a good length, but any fabric solids, fabric prints that look believable as book covers, and most clothing-weight and home decor-weight fabrics can be used. I’ve got canvas, upcycled curtains, bits of old clothes, and refashioned formalwear cuts in the bookshelf quilt blocks I’ve created so far, and they all look great!
  • measuring, cutting, and sewing tools. The most time-consuming part of the process is measuring and cutting all the fabric strips. I’m multi-tasking by catching up on Call the Midwife as I work–feel free to suggest what show I should binge next!

Step 1: Cut and piece your first book.


I’m going to assume that your bookshelf quilt block is also going to be 10.5″x10.5″ unfinished, so make your own adjustments if it’s not.

In your block, you want books that are different colors/patterns, different heights, and different widths. For heights, any book height between 10.5″ and about 2″ looks good, and for widths, I’ve been going with increments between 1.5″ and 2.5″.

Start with one book strip that fits those guidelines–above, my purple strip is 1.5″x6.5″.


Using a .25″ or .5″ seam allowance, as you prefer, sew a strip of background fabric short ends together to the purple fabric. I precut my background fabric into strips of my most common widths to save time here. Trim the background fabric as needed so that the finished piece is approximately 11″ (later, you’ll trim it down to 10.5″).

Step 2: Cut and piece additional books.


Pick a new book fabric and piece another strip! Notice how the new book, which once used to be part of a silk blouse, is both a different width and a different height. This is what will give realism and dimension to the finished bookshelf quilt block.


Don’t worry if your books don’t look good together, because as you can see above, you can rearrange them as you go until you get an arrangement that you like.

You can also piece the book strips to look like fancy binding, as I did with the book on the far left in the above image, and you can piece the book strips horizontally so that they look like they’re stacked on your bookshelf. The scrappiness of this project reminds me of the quilt-as-you-go blocks that I love to make!



Your final design should also be 10.5″ wide, subtracting the seam allowances, so keep piecing book strips until you’ve got it.

Step 3: Piece the bookshelf quilt block.


Piece the book strips together, ironing the seams however you like.

The final step to finish the bookshelf quilt block is to square it up to 10.5″x10.5″. If you need to add extra fabric to the height of the block, put a strip of background fabric along the top of the block and it will just look like you’ve got some short books in that section of shelves. If you need to add extra fabric to the width, stick another book on your shelf or add a strip of background fabric to either end to make it look like you’ve got space for more books on your shelf!


With 20 blocks done and 28 blocks to go, I’m so excited about how lovely this bookshelf quilt is looking so far! I’m getting anxious to start piecing blocks together to make whole shelves, but I know I need to wait until all my blocks are done so I can rearrange them until they look their cutest.

And with this method, the blocks are coming together so quickly that I might even have time to Foundation Paper Piece a couple of vases or plant pots or tchotchkes, after all!

P.P.S. Want to follow along with my craft projects, books I'm reading, road trips to random little towns, looming mid-life crisis, and other various adventures on the daily? Find me on my Craft Knife Facebook page!

No comments:

Post a Comment